Fix a wall light

We have published our first recipe book, Maroque's Little Yellow Cook Book is free to download!

How To... > Fix a wall light

Fixing a wall light

IMPORTANT
As with anything electrical, if you are unsure what you are doing contact a qualified electrician

You will need:

	Flat connector plate, 100mm x 40mm, bent at right-angles in a vice.
	Antique-effect brass lamp-holder.
	Threaded connecting rod, to fit the base of the lamp-holder, with plastic grommit and fixing nut (not shown).

Fix the wall light in three steps:

	Step 1. Thread the connecting rod and grommit into the base of the lamp-holder.
	Step 2. Fasten the angled plate to the wall and seat the lamp-holder in a hole on the plate. Secure with the fixing nut.
	Step 3. Ensure the plate and lamp-holder are properly earthed and the fixing nut is tight. The wall light is now ready to receive the light shade.

PLEASE NOTE
Do not under any circumstances fit a wall light unless you are happy with what you are doing. Electricity is very dangerous. If in doubt consult a qualified electrician.

[Return to top]